Zoeller®

Zoeller® 282-0001 M282 High Head Waste-Mate Submersible Sewage Pump, Automatic, 1/2 hp, 115V, Cast Iron

ZOEM282 MFG #: 282-0001
Zoeller® 282-0001 M282 High Head Waste-Mate Submersible Sewage Pump, Automatic, 1/2 hp, 115V, Cast Iron
  • Flow Rate: 127 gpm
  • Material: Cast Iron
  • Motor HP: 1/2 HP
  • Non-Automatic / Automatic: Automatic
  • Outlet Size: 2 in Female or 3 in NPT
  • Amperage Rating: 10.3 A
  • Bearing Type: Sleeve
  • Cord Length: 10 ft
  • Cord Type: 3-Wire Neoprene
  • Frequency Rating: 60
  • Impeller Type: Non-Clogging Vortex
  • Manufacturer: Zoeller Company
  • Manufacturer #: 282-0001
  • Maximum Head: 35 ft
  • Phase: 1
  • Series: High Head Waste-Mate
  • Speed: 1750 rpm
  • Temperature Rating: 130 degF
  • Voltage Rating: 115 V
Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller's cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, powder coated epoxy finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.

Submersible Sewage Pump, 1-Phase 1-Seal, Series: Waste-Mate 280, 127 gpm, 2 or 3 in FNPT Outlet, 26 ft Maximum Head, 1/2 hp, 115 VAC, 10.3 A, 60 Hz, 1725 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 13-9/16 in W x 19-9/16 in H
  • Features
  • Durable, cast iron constructed switch case, motor and pump housing, base and impeller
  • No sheet metal parts to rust or corrode
  • All cast iron class 30 30000 lb tensile strength
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
  • SAE 1117 carbon steel motor shaft (single seal models)
  • Upper and lower ball bearing running in bath of oil
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor (1 ph and auto 3 ph)
  • All models pass 2 in spherical solids
  • Automatic units available with float-operated, submersible mechanical switch
  • Corrosion-resistant, powder coated epoxy finish
  • On point - 16-1/2 in, off point - 5-1/4 in
  • Automatic operation
  • 10 ft cord
  • Permanent split capacitor or 3 phase motor type
  • Class B insulation