Zoeller®

Zoeller® 264-0005 BN264 Wate-Mate Sump & Effluent Pump, Automatic, 4/10 hp, 115V, Cast Iron

ZOEBN264 MFG #: 264-0005
Zoeller® 264-0005 BN264 Wate-Mate Sump & Effluent Pump, Automatic, 4/10 hp, 115V, Cast Iron
  • Flow Rate: 90 gpm
  • Material: Cast Iron
  • Motor HP: 4/10 hp
  • Non-Automatic / Automatic: Automatic
  • Outlet Size: 2 in NPT
  • Amperage Rating: 9.4 A
  • Bearing Type: Sleeve
  • Cord Length: 10 ft
  • Cord Type: 3-Wire Neoprene
  • Frequency Rating: 60
  • Impeller Type: Non-Clogging Vortex
  • Manufacturer: Zoeller Company
  • Manufacturer #: 264-0005
  • Maximum Head: 18 ft
  • Phase: 1
  • Series: Waste-Mate
  • Speed: 1725 rpm
  • Temperature Rating: 130 degF
  • Voltage Rating: 115 V
Considered one of America's most popular sewage ejectors, this robust family of pumps is known for reliability, durability and performance. These pumps are industry proven, built of cast iron with stainless steel hardware. The integral, preset snap- action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With a cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long lasting, trouble-free product.

Submersible Pump, 1-Phase 1-Seal, Series: Waste-Mate 264, 90 gpm, 2 in NPT Outlet, 18 ft Maximum Head, 4/10 hp, 115 VAC, 9.4 A, 60 Hz, 1725 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Auto Reset Thermal Overload Enclosure, Sleeve Bearing, Cast Iron, Green, 14-3/4 in H, Domestic
  • Features
  • Includes
  • Float-operated and submersible (NEMA 6)
  • 2-pole switch
  • Switch cap, motor and pump housing are durable cast iron construction
  • Engineered plastic base
  • Stainless steel screws, bolts, handle, guard, arm and seal assembly
  • Corrosion-resistant, powder coated epoxy finish
  • Hermetically-sealed automatic reset thermal overload protection
  • Upper and lower sleeve bearings running in bath of oil
  • Carbon and ceramic shaft seal
  • Passes 2 in spherical solids
  • On point - 12-1/2 in, off point - 4-1/2 in
  • Simplex and duplex systems available
  • Automatic operation
  • Models available packaged with piggyback variable level float switch
  • 10 ft cord
  • Permanent split capacitor motor type
  • Class B insulation
2-Pole Mechanical Switch, Stainless Steel Float Guard and Switch Arm, Solid Buoyant Polypropylene Float, Stainless Steel Handle and 15 ft Cord with Plug