WATTS®

WATTS® 0036040 G Series, 1GAP Radiator Steam Trap, 1/2 in, Threaded, 100 to 320 deg F, 25 psi, Rugged Brass, Domestic

WAT0036040 MFG #: 0036040
WATTS® 0036040 G Series, 1GAP Radiator Steam Trap, 1/2 in, Threaded, 100 to 320 deg F, 25 psi, Rugged Brass, Domestic
  • Domestic / Import: Domestic
  • End Style: Threaded
  • Material: Rugged Brass
  • Nominal Size: 1/2 in
  • Pressure Rating: 25 psi
  • Temperature Rating: 100 to 320 degF
  • Manufacturer: Watts Water Technologies
  • Manufacturer #: 0036040
  • Series: G Series
Series G, GH, MG, MGH Thermostatic Radiator Steam Traps are designed to remove condensate, air and non-condensable gases from heating systems, while still sensitive enough to close tightly in the presence of steam. Available in choice of various body patterns including angle, straightway, left hand corner, right hand corner, vertical and vertical double union.

WATTS® Radiator Steam Trap, Series: G, 1/2 in Nominal, Threaded, 25 psi, Rugged Brass, 100 to 320 deg F, Domestic
  • Features
  • Rugged brass construction with union inlet, duplex phosphor bronze diaphragm sensitive within 3 deg F
  • Hardened stainless steel valve
  • Stainless steel valve seat
  • Diaphragm and seat both replaceable
  • Uniform operation within pressure range
  • Superior operation under highest vacuum
  • Each trap factory tested
  • 1/2, 3/4 and 1 in standard patterns
  • The steam trap shall have a operating pressure of up to 65 psi
  • The trap body shall be manufactured out of rugged brass, the diaphragm shall be of duplex phosphor bronze type with hardened stainless steel valve, the seat shall be stainless steel
  • Thermostatic radiator steam traps are designed to remove condensate, air and non condensable gases from heating systems, while still sensitive enough to close tightly in the presence of steam
  • For low pressure and vacuum heating, convectors, unit ventilators, radiators, fin pipes, drip points, air vents