Haws®

Haws® AXION® 9201E Emergency Tempering Thermostatic Mixing Valve, 1-1/4 in Inlet, 7-5/8 in L, Brass

HAW9201E MFG #: 9201E
Haws® AXION® 9201E Emergency Tempering Thermostatic Mixing Valve, 1-1/4 in Inlet, 7-5/8 in L, Brass
  • Inlet Size: 1-1/4 in
  • Material: BRASS
  • Length: 7-5/8 in
  • Manufacturer: Haws
  • Manufacturer #: 9201E
  • Type: Emergency Tempering
Model 9201E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The modular brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (26 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 95 deg F (16 - 35 deg C). Maximum inlet temperature: 180 deg F (82 deg C). Recommended inlet temperature: 140 deg F (60 deg C). Minimum inlet temperature: 120 deg F (49 deg C) Inlets 1-1/4 in FNPT. Outlet 1-1/4 in FNPT.

Haws® AXION® Thermostatic Mixing Valve, Emergency Tempering, 1-1/4 in Inlet, 7-5/8 in Length, Brass
  • Features
  • A flow rate from 1 to 31 gpm (117.3 L) for better temperature control across the operating range
  • Lowest internal pressure drop for this class of valve (Advantage where supply pressure is low)
  • Wax based thermostat technology for fast response time with proven highly reliable temperature control
  • Highest cold water bypass flow rate in the industry (65% of rated tepid flow rate)
  • AXION® superior design and technology provide a complete safety solution for increased victim comfort
  • Modular brass design with internal check stops
  • Over-sized valve seats resist failures caused by foreign matter
  • A new and efficient shuttle design eliminates valve sticking
  • A custom funnel design improves temperature control at low flow rates
  • Cold water by-pass valves are closed during normal operation, regardless of flow rate