Sioux Chief

PEX Chair™ 550-PC2 Slab Organizer, 1/2 in PEX Pipe, ABS, Domestic

SIO550PC2 MFG #: 550-PC2
PEX Chair™ 550-PC2 Slab Organizer, 1/2 in PEX Pipe, ABS, Domestic
  • Domestic / Import: Domestic
  • Material: ABS
  • Pipe Size: 1/2 in PEX
  • Dimensions: 7.66 in L x 6.75 in H
  • Manufacturer: Sioux Chief
  • Manufacturer #: 550-PC2
Sioux Chief PEX Chair&rade; slab organizer is designed to support single lines of 1/2" PEX tube in residential slab or commercial multi-floor construction. Design shall include a bend radius that does not kink the tube. Tube organizer shall be designed to include an interlocking feature on base exterior allowing installers to connect multiple units in parallel or offset when necessary. Device shall include rod receiver to fit #3 rebar or 3/8" threaded rod as a ground stake. Optional utility grade polyethylene corrugated sleeve material or common 4-mil poly pipe protection shall be used when necessary. Design shall include a raised mid-section to allow concrete to flow through and around the chair. Riser shall include angled cut to easily install and maintain the tube perpendicular to the slab during pour.

PEX Chair™ Slab Organizer, 1/2 in PEX Pipe, ABS, 7.66 in L x 6.75 in H, Domestic
  • Features
  • Interlocking tongue & groove design connects multiple units in parallel or offset configuration that allows for 21/2" center-lines
  • Raised mid-section allows concrete to easily flow through and around the chair
  • Front scallop lifts tube 1-inch off the form, which is ideal for 4-inch+ pours; can also be trimmed at the base to lower the tube's height on pre-cast deck over pour jobs
  • Side receiver fits #3 rebar or 3/8 in ATR for ground-stake applications
  • Rear contour at base conforms to vent pipe when installing PEX from opposite directions
  • Angled design in the "hook" makes installation easy, holds tube vertically and will not kink tube
  • Sized to fit utility grade polyethylene corrugated sleeve material or 4-mil sleeve material