Quadex I&I Guard SCF200 (Single Component Foam) Gel - 600 mL Polyurethane Grout

I & I Guard® – SCF 200 is a single component, moisture-activated and MDI/TDI blended polyurethane injection grout designed for sealing persistent water leaks caused by large cracks or ill-fitting joints in concrete structures. I & I Guard® – SCF 200 is capable of absorbing up to 12x its weight in water. Gel consistency, 10:1 water ratio. Ideal for manholes, tunnels, pipes, vaults and tanks of all construction materials. APPLICATION INFORMATION Recommended for active, high-volume water flow, where large cracks, voids or joints in concrete structures, must be sealed. Effective solution to stabilize moving cracks and joints caused by freeze/thaw conditions and other forms of external pressure. HOW IT WORKS Quadex I & I Guard-SCF 200 can be applied via two techniques: EGP or V-PAT. The resin reacts to moisture to form a resilient, flexible seal accomplished by three mechanisms: the resin seeks out water in the space and adheres to the surface, then begins to expand forming a tight compressive seal, while the network of compressed grout material within all the cracks forms a mechanical lock. SAFETY Always use OSHA-approved personal protective equipment (PPE). Refer to the SDS for complete safety precautions. STORAGE Store in temperatures ranging from 45°F – 95°F (7°C – 35°C) in a dry environment. Container must remain tightly closed when not in use. Contents are packaged under dry nitrogen to keep moisture out and extend product shelf life.