Quadex Quad-Plug Fast Curing Hybrid Hydraulic Cement, 50 lb Bucket
SOUQUADPLUG
MFG #: QUAD-PLUG
- Color: Grey
- Container Size: 50 lb
- Container Type: Bucket
- Form: Powder
- Curing Time: 30-60 sec
- Manufacturer: Source One Environmental
- Manufacturer #: QUAD-PLUG
- Odor / Scent: Odorless
- Type: Cementitious
Quad-Plug is a blend of special cements and admixtures which are designed to instantly stop running water or seepage in all types of concrete and masonry structures.
TYPICAL PERFORMANCE CHARACTERISTICS
Compressive Strength (ASTM C39)
30 min. >1,500 psi | 10.34 MPa
Bond Strength (ASTM C882)
28 day >500 psi | 3.45 MPa
PACKAGING
Quad-Plug is supplied in a 50 lb. | 11.34 kg. plastic pail.
YIELD
Quad-Plug will yield approximately 0.49 cu. ft. | 0.014 cu. m. per pail.
APPLICATION INFORMATION
To Seal Running Water or Leaks. Prepare crack or hole by chipping out loose material to a minimum depth and width of 0.75 in. | 19.05 mm. Using a rubber gloved hand, place a generous amount of dry Quad- Plug to active leak and maintain external pressure for 60 seconds. Repeat until leak stops.
WARRANTY
Quadex, LLC warrants its products to be free of defects in material and workmanship. Within one year from purchase, if any Quadex, LLC product is proven defective, the company will replace said product or refund its purchase price at its sole discretion. The company’s obligation shall be limited solely to such replacement or refund. There are no other warranties by Quadex, LLC, expressed or implied. There is no warranty if Quadex products are used contrary to Quadex, LLC’s written directions.
PRECAUTIONS
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Quad-Plug should wear necessary eye protection, dust mask and rubber gloves. Read all product labels and technical literature.
- Features
- Product Videos
- RECOMMENDED FOR - Sewer Pipes, manholes, concrete and masonry walls
- FAST ACTING - Stops running water immediately
- PERFORMANCE CHARACTERISTICS - Comprehensive Strength ASTM C39, Bond Strength ASTM C882
- SPECS - One 50 lb. pail covers 51 cubic ft.. 12 sq. ft. of coverage at 500 mils (1/2")
- APPLICATION - Ready to use apply directly to leak