Quadex

Quadex Structure Guard - FM Fiber Reinforced Epoxy Resin

SOUSTRUCTUREGUARD MFG #: QUAD-SG-FM1.5
Quadex Structure Guard - FM Fiber Reinforced Epoxy Resin
  • Color: Blue
  • Container Size: 1 gal x 1/2 gal
  • Container Type: Cartridge
  • Application: Trowel applied
  • Curing Time: 24 hr
  • Manufacturer: Source One Environmental
  • Manufacturer #: QUAD-SG-FM1.5
  • Suitable For Use With: Steel and masonry structures
  • Type: Epoxy
Structure Guard®-FM is a 100% solids epoxy mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure. SURFACE PREP Concrete/Brick: Substrate surface must be Hydro Blasted at 5000 psi, removing any loose concrete or other material. Must be free of grease and oil. ALL SURFACES MUST BE DRY, CLEAN AND FREE FROM OIL, GREASE AND OTHER CONTAMINANTS! TECHNICAL INFORMATION Solids — 100% (no solvents) Volatile Organic Compounds (VOCs) — 0 • Thickness — 125 to 250 mils per coat Number of Components — 2 CURE TIME 70°F or 21°C Re-coat — 2 hours Water Contact — 4 hours • Final Cure — 24 hours TYPICAL PERFORMANCE CHARACTERISTICS Tensile Strength ASTM D638-14 4150 psi Compression Strength ASTM D695-13 9650 psi Flexural Modulus ASTM D790-15e2 8950 psi Flexural Strength Procedure A 437 ksi Coating Pull Off Strength Test ASTM D4541-09 Substrate Failure

  • Features
  • RECOMMENDED FOR - Manholes, wet wells caults and septic tanks
  • ENVIRONMENTALLY SAFE- Non-hazardous, contains No VOCs
  • PERFORMANCE CHARACTERISTICS - Comprehensive Strength ASTM D695-13 9650psi, Tensile Strength ASTM D638-14 4150psi, Flexural Modulus ASTM D790-15e2
  • SPECS - 18 sq. ft. of coverage at 125 mils (1/8")
  • APPLICATION - Structure Guard-FM is best applied using a trowel.
  • 1.5 Gal. Kit