Sign In to View Pricing & Availability
- The RIDGID® K-75A/B, K-1500A/B & K-1500SP Drain Cleaning Machines are for cleaning 11/4w through 10w lines. These machines are driven by induction motors that have a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor. Machines are designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed of 600 to 700 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. K-75 machines come equipped to run 7/8w cable to clean 2w - 4w lines through 175v. They can be adapted to use 5/8w cable to clean 11/4w to 3w lines. K-1500 machines come equipped to run 11/4w cable to clean 3w - 10w lines through 200v - the 1500SP through 300v. They can be easily adapted to use 7/8w cable to clean 2w - 4w lines.
RIDGID® Sectional Drain Cleaning Machine, Bare Tool/Kit: Kit, 2 to 4 in Drain, 175 ft Maximum Run, 1 hp, 115 VAC, 15 A, 600 rpm, 40-5/8 in L x 20-3/4 in W x 27-3/4 in H
- The finest all-around sewer and drain cleaning machine, one man can easily clean the heaviest blockages - Indoors or out, high-speed cleaning gets the job done faster and better
- Unique easy-to-use, instant-acting cable clutch maximizes operator control: Pull down on the handle and the cable spins at 600 rpm, release handle and cable stops instantly
- Wheels to the job site - Sets up fast, cleans up fast
- Equipped to run, easy to handle, 15 ft sections of 1-1/4 in cable to clean 3 to 10 in lines to 300 ft
- Easy clutch jaw change-out adapts K-1500 to run 15 ft sections of 7/8 in cable through 2 to 4 in lines up to 175 ft
- Equipped with full 1500 W motor and heavy duty rotary switch
- 10 in solid ball bearing wheels
- Low profile frame design will fit most crawl spaces
- Includes A-1 RIDGID® drain cleaning mitt and operator's manual
- 115 V 60 Hz reversible motor
- For 2 to 10 in drain and sewer lines
- A-1 Operator's Mitt, A-12 Pin Key, A-34-12 Rear Guide Hose, A-34-12 150 ft Rear Guide Hose, 10 Sections of C-11, 1-1/4 in Cable, (3) A-8 Cable Carriers, A-3 Tool Box and 8-Piece 1-1/4 in Tool Package
- Drain Line Capacity2 to 4 inMaximum Run175 ftMotor HP1 HPVoltage Rating115 VACAmperage Rating15 ADimensions40-5/8 in L x 20-3/4 in W x 27-3/4 in HManufacturerRIDGID ToolsManufacturer #46907Speed600Tool / KitKIT