Maxitrol® | Maxitrol® 325-3L-1/2 Lever Acting Design Line Regulator, 1/2 in, Thread, 2 psi, Aluminum Body

Item #MAX123253L

MFG #325-3L-1/2

: Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.

Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1/2 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 4.2 in Inlet to Outlet Length, Aluminum Body, 3-1/2 in H

: Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only

Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above

Minimum Regulation: Suitable for pilot flow applications

65 psi emergency exposure limit (inlet side only)

1/8 in NPT vent connection

3 in swing radius

Maximum Individual Load: 140000 Btu/hr

Total load of multiple appliance combined capacity: 250000 Btu/hr

1 to 2 psi inlet pressure

7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
: Body MaterialAluminum
End StyleThread
Nominal Size1/2 in
Pressure Rating2 psi
Dimensions3-1/2 in H
Inlet to Outlet Length4.2
ManufacturerMaxitrol Company
Manufacturer #325-3L-1/2
Series325
Temperature Rating-40 to 205 degF
TypeLever Acting Design

First Mobile presents FirstSupply.com in a tile-based menu on your phone!

First InStock is our scannable label program makes it easy to stock your shop with First Supply!