Sign In to View Pricing & Availability
- Maxitrol's 325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
Maxitrol® Appliance Regulator, Lever Acting Design, Series: 325, 1/2 in Nominal Size, Thread, 10 psi, -40 to 205 deg F, 4.2 in Inlet to Outlet Length, Aluminum Body, 3-1/2 in H
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
- Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
- Minimum Regulation: Suitable for pilot flow applications
- 65 psi emergency exposure limit (inlet side only)
- 1/8 in NPT vent connection
- 3 in swing radius
- Maximum Individual Load: 100000 Btu/hr
- Total load of multiple appliance combined capacity: 150000 Btu/hr
- 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
- Body MaterialAluminumEnd StyleThreadNominal Size1/2 inPressure Rating10 psiDimensions3-1/2 in HInlet to Outlet Length4.2ManufacturerMaxitrol CompanyManufacturer #325-3-1/2Series325Temperature Rating-40 to 205 degFTypeLever Acting Design