ICP™ - Comfortmaker® / Tempstar®
F5MA5X18L1AA 1.5 Ton Multi-Speed Singular Meter Fan Coil, 115 V, 18,000 Btu/hr, R-454B Refrigerant, Galvanized Steel, Grey
Sign In to View Pricing & Availability
- The F5MA5 fan coil has the proven technology of ICP fan coil units with R-454B refrigerant as well as vertical and horizontal applications. The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate. Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all ICP heat pumps and air conditioners. Units come with solid state fan controls, 1-inch (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Assembled at the factory compliant with low leak requirements of less than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet leakage rate at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard. The F5MA5 fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted (dark grey) galvanized steel casing. The unit is shipped with a R-454B refrigerant.
- Refrigerant leak detection dissipation system for added safety.
- Multi-tap ECM (electronic commutating motor) motors
- Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
- Five available speed tags to meet a wide range of applications.
- Features when paired with Single stage condensing units: – Single stage air handler with dehumidification, when paired with a dehumidification capable thermostat. – Single stage air handler with option to interface with hydronic coil for Aux heat. – Installer will need to source parts to interface hydronic coil system with R-454B 115V fan coil.
- Features when paired with two stage condensing units and two stage capable thermostat: – Two stage air handler which will offer better temperature control and performance.
- Large, grooved tube, louvered fin coils.
- Efficient, quiet, time-tested blower housings and diffusers.
- Sturdy, drainable condensate pans.
- Construction innovations designed to prevent cabinet sweating.
- Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
- Super-thick R-4.2 insulation with vapor barrier
- Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
- Horizontal hanging provisions on cabinet.
- Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter.
- Entry options for high and low voltage wiring hook-up.
- Leak-preventing sweat connections.
- Thermostatic expansion valve, TXV, on all coils with mechanical fitting connections.
- Straight stub-outs on liquid and vapor service valves for brazeless connection.
- Designed for manufactured housing applications.
- Cooling Capacity18,000 Btu/hrFlow Rate525 cfmNominal Capacity1.5 tonRefrigerant TypeR-454BVoltage Rating115 VCoil TypeSlopeColorGreyCondensate Line ConnectionFPTCondensate Line Size3/4 inControl TypeTXVDimensions14-5/16 in W x 42-11/16 in H x 22-1/16 in DFilter Dimensions13 x 20 inLiquid Line ConnectionSweatManufacturerInternational Comfort ProductsManufacturer #F5MA5X18L1AAMaterialGalvanized SteelMotor HP1/3 HPMotor TypeMulti-Tap ECMNumber of Motor Speeds5Phase1Refrigerant Liquid Line Size3/8 inRefrigerant Suction Line Size5/8 inSeriesA SeriesSuction Line ConnectionSweatTypeSingular MeterWeight120 lbs