Grinnell Fire
Grinnell Fire 74020EHT No 740 Pivot-Bolt Rigid Coupling With Grade "EHT" EPDM Gasket, 2 in, Push-On, Ductile Iron, Non-Lead Paint
Discontinued
- Figure 740 Grinnell® Rapid Installation Pivot-Bolt (GRIP) Rigid Couplings are a proven, dependable, and more efficient method of joining pipe than standard couplings. Simply push the gasket onto the pipe, swing the coupling body over the gasket, and tighten only one bolt. In comparison with other installation-ready couplings, the Figure 740 GRIP Coupling allows clear visual confirmation that the gasket is properly seated on the gasket sealing surfaces.
Grinnell Fire Rigid Coupling, Pivot-Bolt, No 740 Series, Fitting/Connector Type: Coupling, 2 in Nominal Size, Push-On, 2.12 in Thickness, 5.82 in Length, SCH 10, 750 psi, Ductile Iron, Non-Lead Paint, Orange, -30 to 230 deg F, 3.33 in H
- 3323 lb end load
- 0.33 in maximum end gap
- 0.120 in minimum end gap
- 1/2 x 3-3/4 in pivot bolt
- 1/2 x 3-5/8 in coupling bolt
- Grade EHT EPDM center-stop push-on style gasket
- Only one bolt on the coupling requires tightening
- Preparation of the coupling for installation is also quicker
- The nuts do not require un-torquing to remove the gasket as do the nuts used in standard rigid couplings
- Material and gasket selection should be verified to be compatible for the specific application
- End StylePush-OnFinishNon-Lead PaintFitting / Connector TypeCouplingMaterialDuctile IronNominal Size2 inColorOrangeDimensions3.33 in HLength5.82 inManufacturerTyco Fire ProductsManufacturer #74020EHTPressure Rating750 psiSchedule RatingSCH 10SeriesNo 740Temperature Rating-30 to 230 degFThickness2.12 inTypePivot-Bolt