Grinnell Fire
64025EHT No 640 Pivot-Bolt Rigid Coupling With Grade "EHT" EPDM Gasket, Push-On, Ductile Iron, Copper Acrylic Enamel
Discontinued
- The Grinnell® Figure 640 Pivot-Bolt Rigid Coupling joins roll grooved, hard drawn copper tubing systems (CTS). It provides a rigid joint by firmly gripping the entire circumference of the copper tube groove. Figure 640 Pivot-Bolt Rigid Couplings are a proven, dependable, and more efficient method of joining copper tube when compared to traditional methods such as soldering (sweating) joints. Grinnell® Pivot-Bolt Couplings have been tested and proven to install in less than half the time of other standard grooved couplings. Simply push the gasket onto the pipe, swing the coupling body over the gasket, and tighten only one bolt. In comparison with other installation-ready couplings, the Grinnell® Pivot-Bolt Coupling allows clear visual confirmation that the gasket is properly seated on the gasket sealing surfaces.
Grinnell Fire Rigid Coupling, Pivot-Bolt, No 640 Series, Fitting/Connector Type: Coupling, 2-1/2 in Nominal Size, Push-On, 1.9 in Thickness, 6.36 in Length, 300 psi, Ductile Iron, Copper Acrylic Enamel, 3.85 in H
- Only one bolt on the coupling requires tightening
- The grade EHT EPDM gasket is specially designed for an easy push-on installation
- This coupling is also quicker to prepare to install
- The nuts do not require un-torquing to remove the gasket as do the nuts used in standard rigid couplings
- Material and gasket selection should be verified to be compatible for the specific application
- 1/2 x 3-3/4 in pivot bolt
- 1/2 x 3-5/8 in coupling bolt
- 2-5/8 in tube outside diameter
- Grade EHT EPDM center-stop push-on style gasket
- For closed-loop heating systems, -30 deg F to 250 deg F
- For potable water systems, up to 180 deg F
- Recommended for use in low temperature and vacuum systems
- End StylePush-OnFinishCopper Acrylic EnamelFitting / Connector TypeCouplingMaterialDuctile IronNominal Size2-1/2 inDimensions3.85 in HLength6.36 inManufacturerTyco Fire ProductsManufacturer #64025EHTPressure Rating300 psiSeriesNo 640Thickness1.9 inTypePivot-Bolt